Tape
Number

Title, Produced By, Year
Description. (Length)

V001

V002

Pothole Patching, Illinois Department of Transportation
Covers fixing potholes by using a tank/kettle. The video also covers patching by applying emulsions and aggregate in alternate layers until the hole is filled. (30 min)

V003

Motorgrader
4 Part video that covers the operation of a motorgrader from the operator's point of view. (76 min)

Part 1: Introduction to the Machine

Part 2: Start-up, Blade positions and Maneuvering the Grader
Part 3: Operational techniques
Part 4: Maintaining Unpaved Roads

V004

Loader Operations
This video covers the operation of a loader from the operator's point of view. It includes start-up, loader controls, maneuvering, basic operations, and stock piling. (35 min)

V005

Trucks
This video deals with pre-trip inspection, start-up, basic maneuvering, dump operation and shut down. (53 min)

V006

Crack and Joint Sealing, Illinois Department of Transportation
This video deals with utilizing asphalt emulsions from a kettle to fill cracks. A portion of the video deals with routing cracks and installing backer rod. (47 min)

V007

Safe Tree and Brush Removal, Illinois Department of Transportation, 2003
This video demonstrates chain saw safety and maintenance, sawing techniques, falling trees and trimming brush. (19 min)

V008

Commercial Driver's License, Illinois Department of Transportation
Includes the verbal and driving requirements on the test for obtaining a commercial driver's license. (20 min)

V009

Culvert Replacement, Illinois Department of Transportation
Covers step-by-step procedure for replacing an entrance pipe culvert. (12 min)

V010

Loading and Towing Heavy Equipment, Illinois Department of Transportation
Covers safety features to check on the trailer prior to loading, and discusses how to load the equipment. (20 min)

V011

Safe Mowing Procedures, Illinois Department of Transportation, 2003
Covers IDOT's where, when, and why to mow the right-of-way. It also covers noxious weeds and safety when mowing. (17 min)

V012

Radio Communication, Your Vital Link, Illinois Department of Transportation
Covers the use of mobile radios, the universal "Ten" signals code and guidelines for talking on the radio. (17 min)

V013

Shoulder Repair and Ditch Cleaning, Illinois Department of Transportation
Covers repairing low and high shoulders, and the cleaning of ditches. (15 min)

V014

Work Zone Safety, Federal Highway Administration
4 Part Video that discusses work zone safety. (65 min)

Part 1: Work Zone Traffic Control

Part 2: Traffic Control Devices

Part 3: Traffic Control Zones

Part 4: Typical Applications

V015

The Idea Store, Pennsylvania Department of Transportation, 1989
8 part video covering a wide variety of topics. (89 min)

Part 1: How to store plow blades when not in use, a handy land level, a level for measuring the crown of a road, and other innovative ideas. (8 min)

Part 2: Includes ideas on identifying construction signs, fire hose cone hold down, traffic control guidebooks, motorgrader blade changing, measuring aggregate lost, innovative tools from Iowa, and a public relations flier on snow removal. (13 min)

Part 3: Subjects include: two different types of lifter for changing plow blades, the proper way to remove and store locking pin of articulated loader from within the cab, a pamphlet on daily maintenance of motor graders, etc. (10 min)

Part 4: Subjects include: water runoff on rural roads, slush and ice buildup on snow removal equipment, road resurfacing; minimizing aggregate loss, use of discarded tires, portable road closed sign display. (10 min)

Part 5: Subjects include: the horrible hard hat, proper tire inflation, safety grams, proper signing, adopt a highway. (11 min)

Part 6: Roadside wildflowers, effective signs, PA-DOT's Roads Scholar Program, safety promotions, etc. (17 min)

Part 7: Curb Scraper, dump truck air foil, timber bridge info., better cylinder wrench, and ideas from Delaware/Chester P.W.A. (10 min)

Part 8: Hard hat medical decals, Montana's maintenance awareness program, welding a fuel tank, mounting a wing plow and development of a wing cart. (10 min)

V016

Wetted Salt, Dow Chemical
Illustrates the added melting power of salt used for snow and ice control if it is pre-wetted with liquid calcium chloride, and the practical concerns for handling and application. (20 min)

V017

Tire Chip Feature, University of Maine
A demonstration of an experiment using tire chips as a road base insulator to protect a highway from frost damage. (5 min)

V018

The Nuts and Bolts of Jolts, Traffic Research Board
Traffic signals and eliminating transient voltage is discussed. (23 min)

V019

Looking Back, John Deere, 1992
This is an excellent video illustrating the need for observing safety procedures on work sites when working near construction equipment. (17 min)

V020

Hydrated Lime - Key to Improved Pavements, National Lime Association
The addition of hydrated lime is shown to improve durability and lower costs of asphalt while providing a more permanent bond. (21 min)

V021

BOMAG: In-Place Recycling
Detailed in-place recycling shown using Bomag equipment and asphalt emulsions. (28 min)

V022

Staying Ahead of the Storm, National Research Council - SHRP
Discusses weather information and prediction systems for highways. Demonstrates that by utilizing these systems, they will reduce chemical usage, provide less disruption to traffic, and provide for a more efficient maintenance effort. (22 min)

V023

Equipment Maintenance: Program and Scheduling, Montana State University
Presents a practical approach to assuring reasonable maintenance for fleet equipment. Highlights need for continuous equipment checks, maintenance done on schedule, and timely repairs. (46 min)

V024

Subdivisions: A Local Dilemma, Montana State University
Presents examples from Montana's cities and towns to illustrate the basic principles and the reasons for proper planning. (30 min)

V025

Partial Depth Patching, Illinois Department of Transportation
Covers the step-by-step procedure for partial depth patching of a flexible pavement, utilizing bituminous patch material. (18 min)

V026

Handling Pesticides Safely-Herbicides, Monsanto
Discusses the use of herbicides as an effective substitute to mowing and the safe handling of chemicals. Comes with a brochure of how to start a spray program. (21 min)

V027

Blading Unpaved Roads, Federal Highway Administration
Shows techniques to correct various problems associated with gravel roads. (22 min)

V028

Flagging Operations, Federal Highway Administration
Shows proper flagging techniques and required equipment. (33 min)

V029

Pavement Management System for Local Administrators, Federal Highway Administration
This tape describes what a pavement management system is, and why and when to use it. This is not a system development program. (18 min)

V030

Seal Coating: A Matter of Science & Skill, Minnesota Department of Transportation
This tape describes the proper setup and application of seal coating operation. (16 min)

V031

Subsurface Utility Engineering, 1990
This video covers planning for locating underground utilities. (13 min)

V032

Soil Stabilization: Selecting a Modifier
The characteristics and suggested uses of lime, lime with fly ash, cement, and bituminous materials and soil stabilizers. (20 min)

V033

Backhoe Operation & The Hazards of Hurry, 1993
This video covers the basic parts and functions of the backhoe, proper pre-use inspection, various operating techniques, proper shut down procedures, and backhoe safety. (41 min)

V034

LP Gas:  Know the Facts, Federal Highway Administration, 1990
Focuses on the proper handling and use of liquefied petroleum gas, proper storage and transportation, leak detection, and inspection. (10 min)

V035

DISCONTINUED

V036

Highway Signing
This is a three part video on highway signing, sign maintenance documentation, and sign management. (41 min)

Part 1: Highway Signing

Part 2: Sign Maintenance Documentation.

Part 3: Sign Management

V037

A New Way to Lift, National Safety Council
Describes a safe and proper procedure for lifting heavy objects helping to minimize back injuries. (8 min)

V038

Shooting Good Video, Federal Lands Highway Division, 1996
This award winning videotape illustrates the proper procedures for making quality video recordings for project documentation or training. (8 min)

V039

Pneumatic Tire Operation
Daily check, start-up and warm-up, basic operation, rolling techniques, and shutdown. (18 min)

V040

Forklift Operation
Reviews forklift operations to include lifting, tilting, and varying the forks' spacing; also covers required daily checks. (21 min)

V041

Work Zone Safety - Legal Liability, Federal Highway Administration
Discusses the legal liability involving work zones. (16 min)

V042

Setting Speed Limits, Vermont LTAP, 1990
Describes background and misconceptions of speed zones and the procedures for determining speed limits on highways and local roads. Components and considerations of a traffic engineering survey are discussed. The adoption of a resolution and the erection of signs for enforcement are also discussed. (10 min)

V043

Local Government on Trial, Pennsylvania Department of Transportation, 1995
2 part video describing the trial process. (107 min)

Part 1 - The Deposition: Follows a district engineer through the process of giving a deposition. Outlines the purpose of the deposition and provides some advise for giving depositions. Looks at some of the kinds of questions that may be asked. (17 min)

Part 2 - The Trial: Provides the viewer with a moot civil trial. The trial is based upon a fatal automobile accident on a newly reconstructed section of highway where excessive drop off to the road shoulders was blamed as the cause of the accident by the plaintiff (victim's family). The plaintiff sues the contractor and the township where the road is located. Good video for Local Agency Officials whom may be facing litigation involving a work zone related crash. (90 min)

V044

Geotextiles Installation on Gravel Roads, Oklahoma State University, 1990
Discusses the installation and maintenance of geotextile fabrics on low volume roads. (40 min)

V045

Problems with Gravel Roads, Federal Highway Administration, 1995
3 part video that covers gravel road maintenance. (55 min)

Part 1: Discusses the importance of considering the environmental conditions and the materials available when planning to rework a gravel road.

Part 2: Covers the causes, prevention and correction of problems that occur with gravel roads.

Part 3: Shows maintenance equipment and blading techniques.

V046

Chip Seal Applications, Federal Highway Administration, 1995
3 part video that covers applying chip seals. This is an excellent training or refresher video for those planning a chip seal operation. (40 min)

Part 1: Shows preliminary concerns, materials, equipment, surface preparation, weather requirements, and application rates for chip seal operations.

Part 2: Discusses chip seal procedures, binder application, chip spreading and roller operation.

Part 3: Details chip seal problems that can occur and their solutions.

V047

Asphalt Paving Inspection, Federal Highway Administration
3 part video that covers asphalt paving inspection. (60 min)

Part 1: Preliminary Responsibilities

Part 2: Paving Operation

Part 3: Problems

V048

Sign Maintenance and Installation, Federal Highway Administration, 1995
This video discusses the importance of a good sign maintenance program, proper sign installation, safety practices and record keeping procedures. (27 min)

V049

Bridge Maintenance for Local Road Crews, Vermont LTAP, 1994
This video shows maintenance procedures local road crews can use to keep bridges in good condition. (28 min)

V050

Professional Tree Care Safety: Equipment Safety, National Arborist Association
Safety considerations for use of aerial lifts, stump cutters, tree cranes, chippers and chain saws. How to work with various types of tree care equipment in a manner that reduces injury. Work site traffic control. (28 min)

V051

Maintenance Welding: Welding Safety & Tank Repair, Michigan LTAP Center, 1994
This video covers fire hazards, hazard prevention, extinguishing fires, body and eye protection. The tank repair section explains various non-welding methods of tank repair and the proper procedure for the dangerous task of welding or cutting a tank. (52 min)

V052

Maintenance Welding: Gas Welding/Metal Identification, Michigan LTAP Center, 1994
This video explains the proper maintenance of gas welding equipment (tanks, regulators, hoses, torches) and regular setup. It also demonstrates techniques for cutting various types of metal stock, fusion welding, and brazing. The Metal Identification section demonstrates metal identification using chemicals, flame, or the spark test. (87 min)

V053

Maintenance Welding: Arc Welding, Michigan LTAP Center, 1994
This video explains how an arc welder works (AC and DC), welder setup, and special safety issues (open circuit voltage, ventilation, eye and body protection). It also describes the various electrodes and their uses. (50 min)

V054

Brush Cutter, Delaware Department of Transportation
A brush cutter is used to clear roadsides of brush and excess vegetation. This video covers pre-trip inspection, operating techniques, and shut-down procedures. (13 min)

V055

Roadway Design: Balancing Safety, Environment, and Cost, Minnesota Department of Transportation, 1995
This video focuses on the importance of considering these three factors when constructing or reconstructing a roadway. The objective is to help educate citizens and public officials on issues affecting roadway design, and to demonstrate engineering practices that are useful in achieving this balance. (14 min)

V056

What is Anti-Icing and Anti-Icing for Maintenance Personnel, Federal Highway Administration, 1996
This video explains Anti-Icing Technology, its applications and benefits for highway agencies. Anti-Icing is an additional tool for snow and ice control. (22 min)

V057

Utility Cut Repair: Doing it Right, Minnesota Local Roads Research Board
The objective of this videotape is to increase the quality of workmanship associated with making and repairing utility cuts. The video shows possible causes for failed repairs and procedures used in Minnesota for conducting utility cut repairs. (11 min)

V058

Driving Modern Roundabouts, Washington State Department of Transportation, 2002
This video demonstrates ho to safely maneuver through modern roundabouts. (10 min)

V059

Concrete Rubblization and Asphalt Overlay of I-57, Illinois Department of Transportation
This informative videotape explains the rubblization process and demonstrates its application on an Interstate Highway project. (20 min)

V060

Safety Restoration During Snow Removal Guidelines, Federal Highway Administration
This video provides guidelines to follow to maintain safe conditions during highway snow removal operations. Snow removal situations on bridges, super elevated curves, along guard rails, and at intersections are examined. (25 min)

V061

Your Public Image, Texas Department of Transportation
This is an excellent video detailing the importance of understanding the public's perception of highway employees and ways to improve our public image. (19 min)

V062

Stressing Our Future, Iowa Department of Transportation
This is a good video showing the stresses put on rural roads by agricultural vehicles. (9 min)

V063

Preventive Maintenance, Federal Highway Administration, 2000
The video provides a better understanding of the various factors, such as existing pavement condition and environmental effects, which must be taken into consideration when selecting the proper pavement for preventive maintenance. The tape also provides a general overview of the various preventive maintenance treatment options available for both rigid and flexible pavements. (30 min)

V064

The Importance of Road Drainage, Federal Highway Administration, 1997
The importance of surface and drainage maintenance and the inspection of drainage systems are discussed. Topics also discussed include environmental issues associated with road drainage, federal and state permits and liability for elements of design and maintenance. (19 min)

V065

Using Snow Plows on Motorgraders, Federal Highway Administration, 1997
This video details the correct way to attach snow plows to motorgraders and basic information on using snow plows. Three different types of plows are shown: front single, v plow, and the wing plow (16 min)

V066

Equipment Management Systems, Federal Highway Administration, 1997
Various elements of EMS are discussed including shop management, inventory control, fluid dispensing, and financial control. (18 min)

V067

Smart Moves, Federal Highway Administration, 1996
This video describes intelligent transportation systems and how some local agencies have developed programs to make their transportation systems more user-friendly and efficient. (10 min)

V068

Stop & Think - A Campaign Against Vandalism, Pierce County, WA
This is an excellent video portraying the impact of vandalized traffic signs and controls. The video features two dramatizations depicting safety and liability concerns related to vandalized traffic signs. The costs to taxpayers and an interview with a man involved in taking a stop sign that contributed to a fatal accident are also shown. (11 min)

V069

Train the Trainer - Turning Field Experts into Expert in the Classroom, North Carolina LTAP Center, 1998
This is a good video illustrating teaching techniques to help field experts to become effective instructors and presenters (32 min)

V070

Iowa Snow & Ice Control, Iowa Department of Transportation, 1998
5 part video that covers snow and ice control from Iowa DOT's perspective. (115 min)

Part 1: Introduction to Winter Operations. This video shows different types of snow and ice removal equipment and explains their uses. (12 min)

Part 2: Pre-Season Preparation. This video discusses vehicle and equipment checks and maintenance to perform prior to snow and ice season. (30 min)

Part 3: Equipment Operation. This video discusses pre- and post-storm equipment checks, proper radio procedures and the proper clothing to wear for working outdoors in the winter. (11 min)

Part 4: Snow Plowing Technique. This is a very good video showing proper plowing techniques on two-lane and divided four-lane highways, around islands and curbed medians, and through intersections. (31 min)

Part 5: This is a technical video explaining brine making, anti-icing and deicing practices, and road weather information systems (RWIS). (31 min)

V071

Illinois Adopt-a-Highway, Illinois Department of Transportation, 2006
This video describes the Illinois Adopt-a-Highway program and gives details on what an organization is required to do in order to adopt a highway for clean-up and maintenance. (7 min)

V072

Meth Lab Waste Recognition for Adopt-a-Highway Volunteers, Colorado Department of Transportation, 2004
This video educates Adopt-a-Highway volunteers with the dangers of meth lab waste products that may be encountered during clean up. (8 min)

V073

Storm Water Management Systems, Tri-County Regional Planning Commission, 2004
This video is a brief overview of waste water management; of causes of water pollution; and of ways to avoid water pollution. Also, it describes EPA regulations; NPDES requirements; and program to evaluate and control water pollution. (11 min)

V074

General Administrative Duties of Highway Commissioners Seminar, Illinois Department of Transportation, 2005
This video provides a general overview of the administrative duties of highway commissioners, CDL drug and alcohol testing requirements, and risk management. (65 min)

V075

Pothole Repair: Proven Practices, Minnesota Local Roads Research Board, 1999
This video provides an effective overview of the causes of potholes and repair methods. Guidelines for three repair categories are shown: permanent patching, semi-permanent patching and temporary patching. (14 min)

V076

Bridge Deck Construction in Illinois, Illinois Department of Transportation, 1999
This video provides the viewer with construction techniques to reduce bridge deck cracking caused by improper construction techniques. This is a very good video for construction inspectors, bridge construction personnel, and anyone else who is involved with bridge deck construction. (25 min)

V077

Snow & Ice Control 2002, Illinois Department of Transportation, 2002
6 part video that covers snow and ice control from Illinois DOT's perspective. (59 min)

Part 1: Plows & Blades (11 min)

Part 2: Spreaders & Spinners (7 min)

Part 3: Forecasting & Chemical Application (9 min)

Part 4: Pre-Storm Preparation (14 min)

Part 5: Plowing Techniques (13 min)

Part 6: Post-Storm Clean Up (3 min)

V078

Frost Action in Soils, US Army Corps of Engineers, 1992
Explains what frost damage is and how freezing temperatures and moisture effects the Subgrade, and how it can damage and deteriorate various materials through thawing and freezing cycles. (11 min)

V079

Protect Our Pavement: PREVENTIVE Maintenance, Federal Highway Administration
This video provides information on the advantages of preventative maintenance. (14 min)

V080

Sudden Change in Plans, Iowa Department of Transportation

V081

Highway Work Zone Safety : Traffic Control, Iowa Department of Transportation, 1997
This videotape series has been photographed at operating work zones. The viewers will see examples of good safety practices, as well as actual safety hazards and unsafe working conditions. Each videotape in the series has an accompanying instructor's guide. The first 3 part grouping contains information concerning traffic control. (69 min)

Part 1: Professional Flagging. Flaggers are responsible for the life-or-death safety of everyone who works near traffic. This videotape covers basic principles, basic procedures, and applications for effective and safe flagging. (47 min)

Part 2: Traffic Control Safety. This video shows how to be safe by following some simple, logical procedures for setting up traffic controls. The program also describes the most common kind of work zone accident - the rear-ender. (11 min)

Part 3: One Step from Death. This video shows five accident simulations based on typical safety problems found in highway work zones. (11 min)

V082

Highway Work Zone Safety: Pre-Construction, Iowa Department of Transportation, 1999
This videotape series has been photographed at operating work zones. The viewers will see examples of good safety practices, as well as actual safety hazards and unsafe working conditions. Each videotape in the series has an accompanying instructor's guide. The second 5 part grouping contains information concerning pre-construction safety. (65 min)

Part 1: Utility Safety in Work Zones. This video shows the above and below ground hazards of telecommunications, electric, gas, water, and sewer utilities; the on-site consequences when they are disrupted; and the off-site consequences to those affected by the disruptions. Emphasis on contacting a One Call system (JULIE in Illinois) to help locate underground utility hazards. (14 min)

Part 2: Surveying Safety. This video describes some of the important hazards surveyors face as they work in every phase of construction, from pre-con to post-con, both inside and outside the work zone. (17 min)

Part 3: Loading, Transporting, and Unloading Heavy Equipment. This video shows the special considerations involved with moving equipment too large to be self transported over long distances. Emphasis is on visibility and respect for the size of the equipment. (12 min)

Part 4: Removal/Demolition Safety. This video shows the hazards associated with the demolition and removal of roads, structures, and utilities in preparation for new construction. Emphasis is on personal safety by being knowledgeable about the job, the equipment, and the plan. (11 min)

Part 5: Plant Site Safety. This video covers some of the safety hazards in permanent and portable ACC, PCC, bulk plant, and crushing operations. It shows what to watch out for if you're a pedestrian on the ground, a crane operator, or a truck driver, traveling between the plant and construction sites. (11 min)

V083

Highway Work Zone Safety : Maintenance and Construction, Iowa Department of Transportation, 1999
This videotape series has been photographed at operating work zones. The viewers will see examples of good safety practices, as well as actual safety hazards and unsafe working conditions. Each videotape in the series has an accompanying instructor's guide. The last 4 part grouping contains information concerning maintenance and construction safety. (51 min)

Part 1: Moving Operations/ Maintenance Safety. This video describes a variety of short-term highway operations from snow plowing to patching, from the least dangerous to the most dangerous. It emphasizes awareness of hazards and individual responsibility for safety where standard traffic controls are at a minimum. (13 min)

Part 2: Grading Safety. This video covers some of the safety hazards you'll find on typical grading sites, from clearing and grubbing to final grading. Emphasis is on personal responsibility for safety and awareness of the hazards. (14 min)

Part 3: Paving Safety. This video shows some of the hazards of paving with Portland cement concrete (PCC) and asphalt cement concrete (ACC), including night paving operations. Emphasis is on taking personal responsibility for being aware of the changing hazards during paving operations. (11 min)

Part 4: Structures Safety. This video covers some of the typical hazards around the construction of bridges and culverts, with emphasis on falling, falling objects, and crane hazards. (13 min)

V084

Let's Clean the Air, Chicago Area Transportation Study, 1996
This video highlights the primary causes of ground level ozone and its effects on our quality of life. It includes steps everyone can take to reduce the emissions that lead to ground level ozone. (10 min)

V085

Aesthetic Bridge Rails and Guardrails, Federal Highway Administration, 1991
Alternatives and improvements for aesthetic bridge rails and guardrails. Summarizes the crash testing and special features of concrete bridge rails and guardrails as described in "Summary Report on Aesthetic Bridge Rails and Guardrails" FHWA-SA-91-051. (8 min)

V086

Concrete Bridge Railings: The Modified Three Beam Guardrails - Cable Guardrails, Federal Highway Administration
Covers the AASHTO Design guidelines for bridge railings. Reviews bridge railings tests and designs for all design classifications in accordance with the new AASHTO Guidelines. (14 min)

V087

Cleaning and Clearing of Bridges, Federal Highway Administration
Describes why and how to clean all types of bridges and their components. (13 min)

V088

Concrete Bridge Deck Repair, Federal Highway Administration
Details procedures for permanent repair of partial and full-depth bridge deck holes with cement concrete. Also, proper procedures and proper use of equipment and tools for cutting the concrete, cleaning out the hole. (18 min)

V089

Bridges Unbroken Inspection of Timber Piling, Federal Highway Administration, 1991
This video presents new methods for inspecting timber bridge pilings. (21 min)

V090

A Gift of Value - Value Engineering, Federal Highway Administration, 1987
Presents the six steps of Value Engineering. (9 min)

V091

Breakaway Timber Utility Poles, Federal Highway Administration, 1989
Shows crash test results and actual installation by a utility crew of the breakaway apparatus. (15 min)

V092

Testing and Field Inspection of Roadway Delineation, Federal Highway Administration, 1992
Inspection points important to surface markings; and other types of delineation: signs, object markers. (36 min)

V093

Traffic Signal Systems-Go For The Green, Federal Highway Administration
Demonstrates the need for proper traffic signalization and installation. Describes design, installation, operation and maintenance of state-of-the art signal control. (28 min)

V094

Pedestrian Safety: What you Can Do, Federal Highway Administration
Discusses designing safer pedestrian walkways and the Walk Alert Program. (9 min)

V095

Common Maintenance Problems/Corrections, Federal Highway Administration, 1985
Identifies main causes of most road maintenance problems, discusses importance of doing maintenance tasks correctly. (20 min)

V096

Caution, Litigation Ahead: The Road to Effective Risk Management, Federal Highway Administration
This video explains how planning, organization, and training for safety can reduce tort liability. (25 min)

V097

Reshaping Earth and Gravel Shoulders, Federal Highway Administration, 1988
This video shows the proper procedures for reshaping earth and gravel shoulders to correct shoulder drop-off, rutting, buildup of materials, and excessive weed growth to maintain a safe shoulder. (16 min)

V098

Base and Sub-base Repair, Federal Highway Administration, 1988
This video shows a procedure for repair of base and sub-base that will save money and insure longer-lasting repairs. It covers materials and equipment needed. (16 min)

V099

Walk, Federal Highway Administration
This video explains the importance of and shows how to plan for pedestrian traffic and safety. (13 min)

V100

Utility Cuts in Paved Roads, Federal Highway Administration, 1995
This is a very good video detailing the utility cut operation from the importance of communication among interested parties during the planning stage to finished pavement repair. (41 min)

V101

Training: The Obscured Advantage, Federal Highway Administration, 1996
This is an excellent video detailing the benefits of training for the agency, the supervisors and the work crews. This video is a must see for supervisors. (6 min)

V102

The Diamond Advantage in Highway Grinding, International Grooving and Grinding Association, 1993
This video demonstrates the cost and safety benefits of Diamond grinding. (10 min)

V103

Bituminous Seal Coat, Washington Department of Transportation
Preliminary checks and equipment. Surface preparation and tack coats. Delivery of hot mix paving, compaction, and final product acceptance. (16 min)

V104

Bridge Evaluation and Posting, Federal Highway Administration, 1993
This video consists of  Bridge Components and Inspection Standards, Bridge Deficiencies and Deterioration, Forces and Material Properties Affecting Strength, Bridge, Posting and Permitting Process, and Bridge Management. This is a very good video for evaluating bridges and explaining the bridge posting process. (38 min)

V105

Fit To Be Tied: Retrofitting PCC Pavement with Dowel Bars, Dowel Bar Insertion for Load Transfer at Mid Panel Crack, Retrofitted Load Transfer Devices, Federal Highway Administration, 1997
This video illustrates cost effective techniques for installing dowel bars in PCC pavements. (52 min)